Why is my Keurig not working blinking lights?
Flashing lights on a Keurig usually signal a heating or water flow error. First, unplug and clean the water reservoir and needle to remove blockages. Descale the machine using a vinegar solution to clear mineral buildup affecting the heating element. Check if the water pump runs; if not, it may need replacement. Clean the water tank, and pour in one bottle of Keurig Descaling solution, refill the bottle with fresh water and pour into the solution in the tank. Plug in the Keurig unit – DO NOT PRESS THE POWER BUTTON! Instead, press the 8oz+12oz buttons for 3 seconds and the Brew light will begin to flash.Reset Your Keurig If everything on your machine looks right but your Keurig still won’t brew, it’s time for a reset. To reset your Keurig, open and close the brew head, and then turn it off and unplug it from the wall. Remove the water reservoir, if you can, and let the machine sit for at least half an hour.Check the Water Reservoir and Line The first thing to check is your water reservoir. Make sure it’s filled to the max line and that there are no air bubbles in the water line. If the water reservoir is low, or there’s air in the line, your Keurig won’t be able to brew a full cup of coffee.If your coffee machine is powering on but not brewing, the culprit might be a blocked water line or heating element. Mineral buildup from hard water can clog these components, preventing the water from reaching the right temperature or flowing into the brew basket[^2^].
Why are the lights not coming on my Keurig coffee maker?
If your Keurig won’t power on and shows no lights, first check the power cord and outlet. Unplug and replug to reset. Inspect the internal fuse or circuit breaker if accessible. Clean the water reservoir contacts to ensure proper connection. Keurig Doesn’t Turn On If everything looks fine to you, you may want to try resetting the Keurig. One way to go about it is to unplug the coffee maker from the power source for at least 30 seconds. Then press the POWER button to restart it.If your coffee machine isn’t turning on, the first thing to check is the power supply[^1^]. Ensure the machine is plugged in and the outlet is working. If everything looks fine but the machine still won’t power up, it may have a blown fuse or a faulty power cord.
How to get a free Keurig replacement?
However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll-free phone number 1. BREW (2739). You will be required to provide proof of your delivery date. If the Keurig descaling solution isn’t on hand, white vinegar is the cleaning solution you can have on hand. You’ll want to do equal parts water and vinegar. Fill the reservoir about halfway with white vinegar, and then add water until you reach the top.One common issue that Keurig machines often encounter is when they dispense either too much or too little coffee. If your Keurig dispenses excessively, you can try to clean the puncture needle using a clip made of paper.Thankfully, there are some things you can watch for to know when it’s time to consider a replacement. The most obvious sign that there’s something wrong with your Keurig is that the brew takes a lot longer than usual. Instead of a minute or two, it now takes five or more minutes to fill your cup.