Why is my coffee machine turning on but not brewing?
If your coffee maker lights up but doesn’t brew, check the water pump and heating element. A faulty pump can prevent water circulation, while a broken heating element stops water from heating. Inspect the pump for blockages or damage, and test the heating element with a multimeter. Hamilton Beach FlexBrew Trio Water Pump Not Working If the single-serve side of your FlexBrew Trio won’t pump water, first check the water reservoir for proper placement and fill level. Inspect the pump inlet for clogs or mineral buildup. Run a cleaning cycle with vinegar to dissolve deposits.Hamilton Beach FlexBrew Pot Side Not Working Issue If the FlexBrew pot side lights up but doesn’t brew, check the brew basket alignment and ensure the water reservoir is full. Inspect the needle that punctures the K-cup or coffee grounds for clogs. Clean the needle with a paperclip or brush.
Why does my coffee maker say overload?
It was jammed with coffee grounds from continually punching the k-cups. Used a toothpick to flip out the grounds then rinsed to ensure the needle was open (ok. I brewed my cup. The fix is to remove the top assembly from the unit by pressing in and turning the top assembly counter clockwise an 1/8 of a turn to release it from the unit. Once you have the top assembly separated from the unit, use a paper clip and water alternating to clean out the grind build up within the needle head.Brew indicator light flashes. Coffee maker lid is not closed properly. Push lid down to lock into place. Coffee maker needs to be cleaned.Unplug the coffee maker. Take out the top part with the needle and stick a paper clip inside of the portion that looks similar to a sewing needle. Run it under hot water to make sure there are no loose particles still in it. Dry it out, put it back on the coffee maker, and plug it back in.
Why is my coffee machine not pushing water through?
When your coffee maker stops pumping water, the appliance probably needs to be descaled. Hard water build-up may be affecting your coffee machine’s ability to pump water through it to make coffee. Simply run a descaling cycle to clear the build-up. Check the Water Reservoir and Line If your machine isn’t brewing a full cup, there are a few possible culprits. The first thing to check is your water reservoir. Make sure it’s filled to the max line and that there are no air bubbles in the water line.If your coffee machine is powering on but not brewing, the culprit might be a blocked water line or heating element. Mineral buildup from hard water can clog these components, preventing the water from reaching the right temperature or flowing into the brew basket[^2^].Mineral scale buildup can clog water flow, and if not removed, can cause a machine to stop working. Your coffee won’t be hot enough to enjoy.If your machine begins to operate sluggishly, taking longer to brew than usual, mineral buildup might be the culprit interfering with the process. You might also notice your coffee maker sputtering or making louder noises due to these deposits.