Why does my Keurig Duo keep shutting off?
In most cases, a keurig keeps shutting off because the needle in the k-cup basket hasn’t punctured the k-cup. Some other causes include clogged exit needles, misaligned water reservoir magnets, dirty machines, or faulty outlets. If the water pump in your keurig coffee maker is not working, there is probably a blockage in the water line. Usually, air bubbles in the water line or mineral buildup on the water filter are to blame for this.The main causes of brewing issues with your Keurig are air bubbles and debris in the inner tubing. To address debris buildup, try running the machine without a K-cup. You can also effectively flush out the machine using a descaling solution, like a few drops of white vinegar mixed in water.Check the Water Reservoir and Line The first thing to check is your water reservoir. Make sure it’s filled to the max line and that there are no air bubbles in the water line. If the water reservoir is low, or there’s air in the line, your Keurig won’t be able to brew a full cup of coffee.
How to turn off descale light on Keurig K Duo Essentials after?
Empty and rinse the water reservoir and refill to the max fill line with fresh water. When flashing, press the BREW button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Repeat this step two times until the Descale notification shuts off. To get your Keurig out of descaling mode, press and hold down the 8oz & 10oz buttons together for 3 seconds. This will turn off the descale light and indicate that the process is complete.Getting Your Keurig Out of Descale Mode If running a rinse cycle doesn’t turn off the descale light, disconnect your Keurig for 10 minutes to reset its internal computer. Remove the water tank reservoir and plug the device back in. Wait for the Add Water light to flash.To activate Descale mode, press and hold the CUPS and OZ buttons together for 3 seconds. Press the flashing BREW button to begin the single serve descale cycle. Once complete, press the flashing BREW button to begin the carafe side descale.When flashing, press the 12oz button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew 12oz until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use.
Why won’t my Keurig Duo turn on?
Check to make sure the power cord is plugged all the way in. Check for any damage to the power cord. If there is damage, disconnect from the electrical outlet and look into getting a new power cord. Test the electrical outlet, and test the Keurig on another electrical outlet. One common issue that Keurig machines often encounter is when they dispense either too much or too little coffee. If your Keurig dispenses excessively, you can try to clean the puncture needle using a clip made of paper.