How do you reset the descale light on a Keurig Express?
Fill the reservoir with fresh water (no descaling solution). Press and hold the 6 oz and 10 oz buttons simultaneously until the descale light begins to flash. Run several brew cycles using only water until the descale light turns off. To activate Descale Mode, begin with the coffee maker plugged in and powered off, then press and hold the 6 oz and 10 oz buttons together for 3 seconds. When flashing, press the 8 oz button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink.Run the coffee maker through two complete brew cycles to flush the unit after descaling. Use a full carafe of fresh cold water each time.
How do I get out of descale mode on a Keurig?
To get your Keurig out of descaling mode, press and hold down the 8oz & 10oz buttons together for 3 seconds. This will turn off the descale light and indicate that the process is complete. One common issue that Keurig machines often encounter is when they dispense either too much or too little coffee. If your Keurig dispenses excessively, you can try to clean the puncture needle using a clip made of paper.The main causes of brewing issues with your Keurig are air bubbles and debris in the inner tubing. To address debris buildup, try running the machine without a K-cup. You can also effectively flush out the machine using a descaling solution, like a few drops of white vinegar mixed in water.