Why is the water not flowing in my sage coffee machine?
Check Portafilter and Group Head: Blockages can cause water flow issues. Rinse and clean the portafilter and group head thoroughly to avoid obstructions. Solution: Try slightly lowering or increasing your dose or adjusting the grind to ensure proper headspace. Use a “coin test” by placing a small coin on the puck, locking in the portafilter, and checking for an impression. If you see one, your puck might be too tall, which can block water flow.
Why is water not coming through my sage coffee machine?
Check the Water Pump: If your machine isn’t drawing water properly, it could be due to a failing pump. Check for leaks or blockages in the pump housing and ensure it’s connected securely. Firstly, always start by turning off the pump and disconnecting it from the power source. This step is crucial for safety. After ensuring the pump is powered down, inspect the inlet and outlet to identify visible obstructions. If any debris or foreign objects are present, carefully remove them using gloves.Inspect for Blockages: Disconnect the hose and check for any clogs or debris in the intake and output hoses. Even a small blockage can stop water flow. Check Power Supply: Ensure the pump is properly connected to a power source and is receiving power. Listen for any sounds that indicate it’s running.Bleeding the Pump To bleed the pump, first ensure the pump is off by either pressing the pump shut-off button or turning the red pump shut-off knob. Reduce the pump regulator air pressure to almost zero, then open the pump bleed valve by turning the knob half a turn.
Why is the water not coming through my coffee maker?
The pump is defective If it’s defective or furred up with limescale, the water won’t be able to flow properly. When this occurs, you will hear a muffled sound, then the water will start to emerge in small drops. One thing you can try is descaling the machine then testing it again. The impeller may be damaged by foreign bodies such as gravel or coarse sand entering the pump together with the water. Otherwise the cause may be cavitation, which is the formation of vapour-filled bubbles near the impeller, at points where the water pressure drops.
Why is my sage coffee machine not pulling water through?
Check the Water Pump: If your machine isn’t drawing water properly, it could be due to a failing pump. Check for leaks or blockages in the pump housing and ensure it’s connected securely. If the water filter is not connected or inserted well, the water dispenser may not work. Make sure the water filter is locked in place properly. A clogged water filter is often a culprit of poor water pressure. You can also increase the water pressure by replacing the water filter in a timely manner.If no water is flowing from your bottled water cooler or dispenser, there are generally two main causes: either the reservoir has become frozen, or the air filter is water-saturated due to a leaky bottle or dirty.
What is the common problem with the Sage Barista Touch?
A common problem for the Sage Barista Touch is an internal blockage. This means water won’t pass through the group head, the steam wand or the hot water outlet. The machine makes noises as if the water is trying to pass but either little or no water will. A common problem for the Sage Barista Pro is an internal blockage. This means water won’t pass through the group head, the steam wand or the hot water outlet. The machine makes noises as if the water is trying to pass water. Sometimes water will pass for 5 seconds and then stop.